Takahashi K., Awaji S., Hanai S., Inagaki J., Ioka S., Tsuchiya Y., Okada T., Uto T., Zampa A., Takewa H.
Ключевые слова: HTS, EuBCO, tapes, coils insert, design parameters, insulation, winding configurations, fabrication, screening current, ramp rates, measurement technique, quality control
Tsuchiya K., Takahashi K., Hamada K., Fukui K., Shimada K., Kawano K., Murakami H., Bonito-Oliva A., Kajitani H., Novello L., Wanner M., Davis S., Hatakeyama S., Pietro E.D., Matsunaga G., Nakamoto M., Kojima A., Onishi Y., Terakado A., Valerio T., Frello G.
Ключевые слова: Tokamak, commissioning, test results, arc, discharge characteristics, insulation, termination, joints, test results
Ключевые слова: magnetic systems, hybrid systems, coils outer, LTS, Nb3Sn, NbTi, Rutherford cables, coils insert, coils pancake, design parameters, HTS, Bi2223, tapes, magnetic field distribution, quench, test long-term operation
Ключевые слова: HTS, REBCO, coated conductors, tapes, interfaces, resistance, critical current, heat treatment, joints, solder, joint resistances
Takahashi K., Nishijima G., Awaji S., Hanai S., Inagaki J., Ioka S., Badel A., Okada T., Uto T., Zampa A., Takewa H.
Takahashi K., Nishijima G., Awaji S., Hanai S., Inagaki J., Ioka S., Badel A., Okada T., Uto T., Zampa A., Takewa H.
Ключевые слова: magnets, conduction cooled systems, HTS, EuBCO, tapes, coils insert, coils pancake, impregnation, mechanical properties, stress effects, stiffness, thermal runaway, prototype, fabrication, modeling, test results
Iijima Y., Tsuchiya K., Takahashi K., Awaji S., Kajikawa K., Fujita S., Abe T., Fujiwara Y., Badel A., Daibo M., Okada T., Muto S., Miezaki M.
Ключевые слова: HTS, REBCO, coated conductors, tapes, winding techniques, design parameters, coils pancake, ac losses, joint resistances, experimental results
Ключевые слова: HTS, GdBCO, bulk, rings, thermal stress, heat generation, pulsed magnetization, mechanical properties, fracture behavior, numerical analysis, modeling
Ключевые слова: portable unit, trapped field magnets, gradient, gravity, HTS, REBCO, bulk, rings, levitation performance, magnetic force, prototype, fabrication, measurement setup, cooling technology
Ключевые слова: Tokamak, Japan, central coils, coils solenoidal, power supply, stability, test results, voltage distribution
Ключевые слова: GdYErBCO, GdDyBCO, DyBCO, bulk, single grain, fabrication, infiltration process, mechanical properties, tensile tests, porosity, microstructure, experimental results
Ключевые слова: HTS, GdBCO, bulk, fabrication, infiltration process, seeding technique, melting, comparison, pulsed magnetization, coils, iron yoke, trapped field distribution, experimental results
Ключевые слова: HTS, REBCO, tapes, joints, interfaces, resistivity, magnetic field dependence, temperature dependence, current transfer, measurement technique
Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, tapes, coils pancake, modeling, numerical analysis, ac losses
Ключевые слова: HTS, REBCO, bulk, trapped field magnets, gradient, gravity, numerical analysis, magnetic properties, magnetization, mechanical properties, stress distribution
Iijima Y., Takahashi K., Awaji S., Kajikawa K., Miyazaki H., Hanai S., Fujita S., Ioka S., Badel A., Daibo M., Okada T., Muto S.
Ключевые слова: high field magnets, conduction cooled systems, HTS, REBCO, EuBCO, pinning arrays artificial, tapes, coils insert, winding configurations, stress effects, strain effects, quench protection, critical caracteristics, critical current, angular dependence, design, design parameters, test results, current-voltage characteristics, stress distribution
Ключевые слова: high field magnets, HTS, REBCO, tapes, coils pancake, winding configurations, design parameters, fabrication, mechanical properties, stress effects, stress distribution, strain effects, operational performance, current, critical caracteristics, critical current, n-value, current-voltage characteristics, experimental results
Ключевые слова: HTS, REBCO, tapes, coils, design parameters, fabrication, quench protection, winding configurations, insulationless, impregnation, screening current, mechanical properties, stress distribution, critical caracteristics, current-voltage characteristics, thermal loads, cycling, contact characteristics, resistivity, overcurrent
Ключевые слова: numerical analysis, critical caracteristics, Jc/B curves, MgB2, composites, bulk, rings, pulsed magnetization, trapped field, iron yoke, modeling
Ключевые слова: HTS, REBCO, coated conductors, coils pancake, coils insert, winding configurations, insulationless, ac losses, screening current, modeling, numerical analysis, induced field
Takahashi K., Shi Y., Cardwell D.A., Fujishiro H., Durrell J.H., Ainslie M.D., Namburi D.K., Hirano T., Kamada T.
Ключевые слова: HTS, YBCO, bulk, single grain, design parameters, fabrication, infiltration process, melting, comparison, pulsed magnetization, trapped field, microstructure, pinning, trapped field distribution, critical caracteristics, Jc/B curves, temperature dependence, porosity, experimental results
Takahashi K., Cardwell D.A., Fujishiro H., Durrell J.H., Ainslie M.D., Huang K.Y., Namba S., Chaddock J.
Ключевые слова: HTS, REBCO, bulk, disks, pulsed magnetization, critical caracteristics, Jc/B curves, temperature dependence, modeling, GdBCO, trapped field, experimental results
Ключевые слова: HTS, GdBCO, bulk, cylinders, trapped field magnets, magnetic flux concentration, design, hybrid systems, magnetic field distribution
Ключевые слова: HTS, REBCO, coated conductors, coils insert, conduction cooled systems, design parameters, dissipative properties, local distribution, thermal runaway, high field magnets, quench propagation, modeling, critical current distribution, magnetic field dependence, critical current, temperature distribution
Ключевые слова: high field magnets, conduction cooled systems, mechanical properties, stress effects, coils, stability, quench, coils outer, LTS, Nb3Sn, NbTi, HTS, Bi2223, coils insert, relaxation, REBCO, coated conductors, coils pancake, design parameters, prototype, helium liquid, test results, stress effects, strain effects, stress distribution, numerical analysis
Ключевые слова: trapped field magnets, modeling, magnetic flux concentration, pinning, shielding effects, MgB2, bulk, GdBCO, cylinders, magnetic field distribution, numerical analysis, new
Ключевые слова: HTS, REBCO, bulk, rings, disks, reinforcement, stainless steel, width, mechanical properties, stress effects, thermal stress, magnetization, numerical analysis, trapped field magnets
Ключевые слова: HTS, REBCO, bulk, magnets, rings, reinforcement, mechanical treatment, conduction cooled systems, NMR magnet, spectrometer, modeling, numerical analysis, trapped field, thermal stress, magnetization, stress distribution, new
Tixador P., Chaud X., Takahashi K., Awaji S., Fazilleau P., Badel A., Lecrevisse T., Borgnolutti F., Benkel T., Richel N.
Ключевые слова: hybrid systems, HTS, coils insert, REBCO, coated conductors, high field magnets, test results, coils pancake, design parameters, critical caracteristics, critical current, angular dependence, magnetic field dependence, magnetic field distribution, critical current distribution, tensile tests, mechanical properties, stress effects
Ключевые слова: MgB2, bulk, trapped field, pulsed magnetization, disks, flux jumps, measurement technique, experimental results
Ключевые слова: HTS, YBCO, bulk, pulsed operation, trapped field, trapped field distribution, experimental results
Ключевые слова: HTS, EuBCO, bulk, rings, reinforcement, stainless steel, magnetization, mechanical properties, fracture behavior, trapped field, stress effects, cooling technology, numerical analysis, critical caracteristics, Jc/B curves, trapped field distribution, current density, distribution, experimental results
Tamura H., Mito T., Takahashi K., Hasegawa T., Yamada Y., Hironaga R., Matsumura R., Hosono Y., Tanimoto R.
Ключевые слова: HTS, YBCO, coated conductors, current leads, fabrication, current distribution, transport currents
Takahashi K., Shi Y., Cardwell D.A., Fujishiro H., Ainslie M.D., Zhou D., Dennis A.R., Zou J., Mochizuki H., Namburi D.K.
Takahashi K., Awaji S., Watanabe K., Hemmi T., Nakamoto T., Oguro H., Harjo S., Kawasaki T., Aizawa K.
Ключевые слова: LTS, Nb3Sn, Rutherford cables, neutron diffraction, mechanical properties, strain effects, experimental results, tensile tests, stress effects
Ключевые слова: LTS, Nb3Sn, cables, strain effects, reinforcement, neutron diffraction, mechanical properties, strain effects, experimental results, stress effects
Takahashi K., Awaji S., Watanabe K., Kiyoshi T., Asano T., Hanai S., Sasaki Y., Oguro H., Tsubouchi H., Minegishi K., Inoue I., Suwa T.
Ключевые слова: accelerator magnets, HTS, coated conductors, medical applications, design, design parameters, modeling, numerical analysis, high field magnets
Amemiya N., Ogitsu T., Nakamura T., Takahashi K., Mori Y., Koyanagi K., Yoshiyuki T., Noda K., Yoshimoto M., Otake H., Osanai A.
Osamura K., Takahashi K., Awaji S., Watanabe K., Suzuki H., Oguro H., Harjo S., Machiya S., Aizawa K.
Ключевые слова: accelerator magnets, magnets dipole, coated conductors, HTS, REBCO, critical caracteristics, Jc/B curves, design parameters, high field magnets
Osamura K., Takahashi K., Nishijima G., Awaji S., Watanabe K., Suzuki H., Oguro H., Machiya S., Tsuchiya Y.
Ключевые слова: magnets, cryocoolers, hybrid systems, LTS, Nb3Sn, NbTi, HTS, YBCO, coated conductors, substrate Hastelloy
Ключевые слова: MgB2/Fe, tapes, ex-situ process, pressure effect, precursors, powder processing, fabrication, Jc/B curves, microstructure, critical caracteristics
Takahashi K., Shiohara Y., Kato T., Yamada Y., Hirayama T., Miyata S., Konishi M., Kuriki R., Ibi A., Kobayashi H., Fukushima H.
Takahashi K., Shiohara Y., Kato T., Yamada Y., Hirayama T., Miyata S., Konishi M., Ibi A., Kobayashi H., Fukushima H., Kinoshita A.
Nakamura T., Takahashi K., Awaji S., Watanabe K., Kiss T., Shiohara Y., Inoue M., Yamada Y., Miyata S., Fujiwara T., Ibi A., Mitsui D., Motoyama K.
Takahashi K., Muroga T., Shiohara Y., Watanabe T., Yamada Y., Miyata S., Ibi A., Konishi M.(masaya-konishi@istec.or.jp)
Ключевые слова: HTS, REBCO, coated conductors, IBAD process, PLD process, Jc/B curves, angular dependence, REBCO, YBCO, REBCO, fabrication, critical caracteristics
Nakamura T., Takahashi K., Awaji S., Watanabe K., Kiss T., Inoue M., Yamada Y., Ibi A., Shiohara Y.Y., Mitsui D., Fujiwara T.N.
Ключевые слова: HTS, coated conductors, IBAD process, PLD process, Jc/B curves, angular dependence, fabrication, experimental results, critical caracteristics
Takahashi K., Shiohara Y., Kato T., Yamada Y., Miyata S., Konishi M., Ibi A., Kobayashi H., Fukushima H., Hirayamae T.
Ключевые слова: HTS, REBCO, coated conductors, pinning centers artificial, fabrication
Takahashi K., Shiohara Y., Yamada Y., Miyata S., Kuriki R., Ibi A.(ibi@istec.or.jp), Fukushima H.
Takahashi K., Yamada Y.(yyamada@istec.or.jp), Miyata S., Konishi M., Kuriki R., Ibi A., Kobayashi H., Fukushima H., Ishida S., Kato T.*2 et al.
Takahashi K., Muroga T., Shiohara Y., Yamada Y., Miyata S., Ibi A., Kobayashi H., Konishi M.(masaya-konishi@istec.or.jp)
Takahashi K., Muroga T., Shiohara Y., Watanabe T., Kato T., Yamada Y., Hirayama T., Miyata S., Konishi M., Ibi A.
Takahashi K., Muroga T., Shiohara Y., Watanabe T., Kato T., Yamada Y., Hirayama T., Miyata S., Konishi M., Ibi A., Kobayashi H.
Ключевые слова: HTS, YBCO, YBCO, coated conductors, defects columnar, Jc/B curves, anisotropy, pinning, experimental results, microstructure, fabrication, critical caracteristics, substrate Hastelloy
Muroga T., Shiohara Y., Watanabe T., Yamada Y., Iwai H., Miyata S., Konishi M., Ibi A., Takahashi K.(ktakahashi@istec.or.jp)
Ключевые слова: HTS, REBCO, YBCO, REBCO, REBCO, coated conductors, substrate Hastelloy, Jc/B curves, experimental results, critical caracteristics
Takahashi K., Muroga T., Shiohara Y., Watanabe T., Yamada Y., Iwai H., Miyata S., Ibi A.(ibi@istec.or.jp)
Ключевые слова: HTS, YBCO, coated conductors, texture, critical current, substrate Hastelloy, thickness dependence, fabrication, critical caracteristics
Nishijima G., Awaji S., Watanabe K., Takahashi K.(k-taka@imr.tohoku.ac.jp)
Nishijima G., Awaji S., Watanabe K., Romanovskii V.R.(vromanovskii@netscape.net), Takahashi K.-I.
Nishijima G., Awaji S., Watanabe K., Takahashi K.(k-taka@imr.tohoku.ac.jp)
Watanabe K.(kwata@imr.tohoku.ac.jp), Takahashi K., Nishijima G., Awaji S., Motokawa M., Koyama K., Kobayashi N.
Ключевые слова: HTS, Bi2223, coils, hybrid systems, LTS, Nb3Sn, cryogenic systems, conduction cooled systems, review, power equipment
Takahashi K., Nishijima G., Awaji S., Motokawa M., Watanabe K., Jikihara K., Ishizuka M., Sakuraba J.
Ключевые слова: LTS, NbTi, hybrid systems, cryocoolers, test results, magnetic systems
Watanabe K.(kwata@imr.tohoku.ac.jp), Takahashi K., Mogi I., Nishijima G., Awaji S., Motokawa M.
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.